Prime Steel Coils &
Flat-Rolled Sheets
(SAE 1006, ASTM A653, EN 10346 DX51D & JIS G3141)
Direct mill allocations of prime hot rolled coils (HRC), cold rolled coils (CRC), continuous hot-dip galvanized steel (GI), and prepainted galvanized coils (PPGI/Aluzinc). Engineered for industrial tube manufacturing, precision automotive stamping, pre-engineered building (PEB) roofing, HVAC ducting, and drum fabrication. Delivered on chartered breakbulk vessels (CIF/CFR) with 100% independent SGS inspection. Available subject to current specification, origin, and allocation.
High-Drawability Hot Rolled, Cold Rolled &
Galvanized Flat Steel for Industrial Manufacturing.
Flat-rolled steel commodities form the primary feedstock for modern manufacturing and construction economies. Whether re-rolling commercial coil into ERW precision tubing, stamping intricate automotive chassis brackets, forming corrugated insulated roof panels, or manufacturing high-pressure gas cylinders, coil surface smoothness, consistent gauge tolerances, and uniform mechanical drawability dictate manufacturing yields.
Asia & Africa General Trading delivers continuous prime allocations of hot-rolled coils (HRC), cold-rolled coils (CRC), continuous hot-dip galvanized coils (GI), and prepainted steel coils (PPGI/Aluzinc). Sourced directly from premier integrated blast furnace and continuous strip rolling mills across global trade corridors, every coil parcel conforms to international standards including SAE 1006/1008, ASTM A653, EN 10346 (DX51D+Z), and JIS G3141.
Managed through our Dubai commercial desk, our flat-rolled division coordinates tight gauge tolerances (±0.02 mm), customized slitting widths, precision sheet levelling, heavy VCI anti-rust moisture packaging, and chartered breakbulk maritime logistics across key seaports in the Middle East, Africa, and Asia.
Benchmark Standards & Coil Specifications
Our flat-rolled coils and sheets are produced to international American, European, and Japanese industrial specifications, accompanied by complete EN 10204 Type 3.1 mill test certificates.
| Parameter | Hot Rolled (HRC / HRS) | Cold Rolled (CRC / CRS) | Galvanized (GI / PPGI) |
|---|---|---|---|
| Governing Standards | SAE 1006 / 1008 • ASTM A36 | JIS G3141 SPCC-SD • EN 10130 DC01 | ASTM A653 CS-B • EN 10346 DX51D+Z |
| Thickness Range | 1.20 mm – 25.00 mm | 0.30 mm – 3.00 mm | 0.18 mm – 2.50 mm (GI / PPGI) |
| Standard Widths | 900 mm – 2,000 mm (1219 / 1250 / 1500) | 900 mm – 1,500 mm (1000 / 1219 / 1250) | 900 mm – 1,250 mm (slit widths from 20mm) |
| Yield Strength (Min) | 195 – 235 MPa (drawing / structural) | 140 – 240 MPa (optimized deep draw) | 140 – 300 MPa (commercial / structural) |
| Tensile Strength | 300 – 510 MPa | 270 – 410 MPa | 270 – 500 MPa |
| Total Elongation (A80) | ≥ 30% – 38% (High Ductility) | ≥ 34% – 42% (Deep Drawing) | ≥ 22% – 30% |
| Coating / Surface | Black / Pickled & Oiled (HRPO) | Bright / Dull finish (oiled / dry) | Zinc Z60–Z275 • Prepainted RAL 15–25μm |
| Spangle Type (GI) | N/A (Mill scale or pickled) | N/A (Cold-rolled smooth) | Zero Spangle • Regular Spangle • Chromated |
| Inside Diameter (ID) | 610 mm / 762 mm | 508 mm / 610 mm | 508 mm / 610 mm |
| Processed Forms | Master coils, slit strips, chequered plates | Coils, slit bands, sheet bundles | Coils, slit strips, corrugated roofing sheets |
Need Pickled & Oiled (HRPO), Galvalume (Aluzinc AZ150), or Custom RAL PPGI Coils?
We arrange customized mill allocations for Hot Rolled Pickled & Oiled (HRPO) for laser cutting and stamping, 55% Aluminium-Zinc alloy coated Galvalume (ASTM A792 AZ150) for extreme coastal corrosion resistance, high-yield structural galvanized grades (S350GD+Z / S550GD full hard), and pre-painted coils in specific RAL color shades with PVDF or silicone-modified polyester coatings.
Common Applications & Manufacturing Uses
Our hot rolled, cold rolled, and galvanized coils and sheets supply vital raw material for major stamping, building envelope, and container industries.
01
PEB Roofing & Wall Cladding Profiles
Galvanized and PPGI pre-painted coils (0.30mm to 0.80mm) are roll-formed into trapezoidal corrugated roof panels, standing seam architectural cladding, and insulated sandwich panel facings.
02
Cold-Formed C & Z Purlins & Stud Framing
High-yield galvanized slit strips (1.5mm to 3.0mm in S350GD+Z) deliver high torsional stiffness and corrosion protection for secondary structural building purlins and light gauge steel framing.
03
Composite Decking & HVAC Ductwork
Hot-dip galvanized coils (Z120 to Z275) with tight zinc adhesion withstand lock-forming quality (LFQ) bending for commercial ventilation ducts, cable trays, and structural floor decking profiles.
04
LPG Cylinders, Steel Drums & Stamping
Draw-quality hot-rolled coils (SAE 1006 / 1008 and pressure vessel grades) deliver high elongation and uniform wall thinning for deep-drawn industrial chemical drums, gas cylinders, and wheel rims.
05
Domestic Appliances & Automotive Parts
Cold-rolled coils (JIS SPCC / EN DC01) provide superior surface smoothness and tight gauge tolerances for refrigerator cabinets, washing machine wrappers, automotive internal stampings, and electrical enclosures.
06
ERW Tube Re-Rolling & Pipe Manufacturing
Slit hot-rolled and cold-rolled coil strips serve as the primary raw material for high-frequency continuous ERW pipe mills, producing hollow structural sections, scaffolding tubes, and conduit pipes.
Quality Guarantee & Metallurgical Integrity
Every master coil and sheet bundle is verified for dimensional profile tolerances, metallurgical formability, zinc coating adherence, and surface perfection prior to export lashing.
Continuous Thickness & Crown Profiling
High-precision laser and radiometric non-contact thickness gauges continuously scan across coil width, ensuring micro-millimeter tolerance control with zero crown deviation or edge taper.
Zinc Coating & Adhesion Testing
Triple-spot weigh-strip-weigh tests verify total zinc mass (g/m²) per ASTM A653. 180-degree bend and impact zero-spangle adhesion tests guarantee zero flaking or peeling during aggressive roll-forming.
EN 10204 3.1 Certified MTCs
Every shipment is backed by manufacturer mill test certificates verifying exact ladle chemistry (C, Mn, P, S, Si), tensile yield, elongation values, Erichsen cupping indices, and paint coating DFT values.
Independent SGS / BV Load-Port Survey
Independent inspectors survey moisture-proof VCI wrapping integrity, verify coil identity tags against heat certificates, conduct draft surveys for exact cargo tonnage, and supervise vessel hold stowage.
Where We Deliver — Major Seaports & Markets
Direct breakbulk coil vessels and containerized heavy-stuffing shipments connecting world-class hot and cold rolling mills to roofing manufacturers, PEB fabricators, and service centers globally.
GCC & Middle East
PEB & Service CentersHigh-volume supply of prime HRC, CRC, and galvanized coils (Z120–Z275) to pre-engineered building (PEB) fabricators, sandwich panel lines, HVAC duct manufacturers, and cable tray producers across the Arabian Gulf.
East & Southern Africa
Roofing & CorrugationDedicated charter allocations of thin-gauge galvanized and PPGI coils for corrugated roofing sheet factories, regional cold-forming lines, and hollow section tube mills in East and Southern Africa.
West Africa
Industrial SheetingHeavy breakbulk shipments of commercial grade HRC, structural plates, and slit coils supporting steel drum fabrication, agricultural machinery, and civil sheet piling across major West African hubs.
Seaworthy Export Packaging
Moisture BarrierTriple-layer protection: waterproof VCI anti-rust paper wrap, complete metallic inner and outer protective metal jackets, steel edge guard rings, and 3 radial + 3 circumferential high-tensile steel bands.
Frequently Asked Questions
About Steel Coils & Sheets.
Answers to common questions regarding coil thicknesses, zinc coating mass, slitting capabilities, moisture-proof marine packing, and commercial LC payment terms.
Hot Rolled Coils are available in thicknesses from 1.20 mm up to 25.00 mm, with standard mill widths of 900 mm to 2,000 mm (most commonly 1,000 mm, 1,219 mm, 1,250 mm, and 1,500 mm). Individual coil weights range from 15 to 28 metric tons with standard 610 mm / 762 mm inside diameter (ID). Available subject to current mill specification, origin, and allocation.
We supply continuous hot-dip galvanized steel coils with zinc coatings ranging from Z60 up to Z275 g/m² (total both sides). Available spangle finishes include Regular Spangle, Minimized Spangle, and Zero Spangle with chromate passivation and light anti-fingerprint oiling, meeting ASTM A653 CS Type B, EN 10346 DX51D+Z, and JIS G3302 standards.
Yes. Through our partnered coil service center facilities, we provide precision rotary slitting into slit coils (minimum strip width 20 mm) and precision cut-to-length sheet processing in standard commercial dimensions (1000x2000mm, 1219x2438mm, 1250x2500mm, and 1500x3000mm) or custom lengths up to 12,000mm.
Every export coil is wrapped with waterproof VCI anti-rust paper, fully clad with metallic inner and outer protective metal jackets, fitted with steel edge guard rings, and strapped tightly with 3 radial and 3 circumferential high-tensile steel bands (eye-to-sky or eye-to-wall stowage) for maritime breakbulk holds.
International transactions are structured via 100% Irrevocable Letter of Credit (LC at Sight) issued by a Tier-1 international bank under ICC UCP 600 rules, or telegraphic transfer (T/T) against shipping documents. Delivery is executed under Incoterms 2020 (CIF or CFR to discharge port, or FOB load-port).
Direct Mill Supply Desk